Dragon Puppet Sculpture

DragonSculpture1-MRKessell

I volunteered to help out a local Cub Scout troop who were involved in a robotics competition. They wanted to create a robotic, shoulder-mounted, dragon puppet. I sculpted this model out of polymer clay, which will be used to create molds and to cast the puppet in foam rubber.

The first step was to figure out the dimensions of the puppet, decide what actions it would perform, and plan for how the robotics would fit inside. Working with Keith, the troop leader, we got a rough plan together. I then had to sketch up something that everybody would approve of. My aim was to make a baby dragon, possibly something cute.

DragonDims-Model

This was my original “cute” baby dragon sketch with rough dimensions added. You can see below that the plan here was to make the sculpture in multiple pieces due to the size constraints of my toaster oven, for ease of molding, and to allow for access to certain parts of the future robotics.

554

Next, I gathered my materials together.

IMG_2471

IMG_2472
After gathering all of my materials, I printed the dragon out full size. I then used wire to start building the armature, using the full size print out as a guide. I used thicker 14 gauge wire for most of the skeleton and used an assortment of thinner wire to wrap the pieces together.

556

To make the head, wings and tail removable, I devised a plan to use small pieces of square steel tube to act as sleeves to receive small pieces of square steel bar. I used a product called SteelStik to connect the steel pieces to the wire armature.

560563 566 567

I then bulked out the armature using aluminum foil and wrapping it in painter’s tape. I should’ve used masking tape, it’s probably less expensive, but I didn’t have any on hand, so I just ran with it.

582

I bulked it out some more using Original Sculpey, trying to get closer to the finished shape of a dragon. In some areas I added too much clay and ended up shaving it down after it was baked.

586

I added the wire claws before bulking out the rest of the arms and legs.

589

These claws were incredibly sharp and scratched me every chance they got. After a while I figured out that I needed to tape them up for my own safety.

Below you can see the first layer of Original Sculpey on the head. I realized it was it was too much after it was baked, he looked like Snoopy, so I ended up shaving the clay down until it looked correct. Then I continued to bulk out the arms and legs with original Sculpey.

591

I began the final layer of Super Sculpey on a back leg, just in case it didn’t come out quite right. I was pleased with the outcome, and did the rest the same way.

599 600

I then moved on to the wings, which I thought would be the next biggest challenge. I like to get the hard stuff out of the way. I was hoping to achieve something bat-like.

597 592IMG_2006

It was a long process adding the scales, which were basically just little balls of clay, in various sizes, flattened out on the smoothed skin below.

IMG_2008 IMG_2007

Claw protectors.

IMG_2041

You can see my first attempt at the dragon’s head wasn’t moving in the right direction. I had to step away for the night and come back to it with fresh eyes.

IMG_2038

Coming back to it, I realized that I need to replace the eyes and shave off a bit of clay. I then added some teeth, added some spikes, some texture, and he looked a lot better.

IMG_2070 IMG_2057 IMG_2052 IMG_2050

IMG_2075 IMG_2072

The tail prepped for baking.

IMG_2084

Claws ready to be attached.

IMG_2109 IMG_2107 IMG_2113

IMG_2077

The head ready for baking.

IMG_2076

IMG_2117

Nearly complete. He still needs a lower jaw and his underbelly plating.

IMG_2122

DragonSculpture2-MRKessell

After two months working nights and weekends, the dragon is complete.

dungeon_dragon_disassembled_by_kexluthor-d86hhd1

Here he is disassembled.

The next step will be molding and casting. I will add updates as this project moves ahead.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s